Description
WATCH THE FEATURES VIDEO
70mm (5.6X) vs 50mm (4X) VIDEO
Key Points
- 100mm Eye Relief.
- Focus Free Lens.
- Circular Screen – Natural view – World First.
- Centre Reticle Position.
- 30mm Tube Design – Use any rings – no picatinny rail required.
- Ballistics Calculator built in.
- 2k Sensor
The first 3 items are major improvements
- Eye relief is like a traditional day scope.
- Focus free takes care of most of your focusing requirements.
- Circular View eye piece is a world first.
- These are patented features.
Overview
The DS35 LRF has a traditional day scope exterior, but it is a multifunctional day and night scope with cutting-edge technology. Stay one step ahead of the competition by being the first to use a new 800 x 800 Circular LTPS display. This results in higher picture resolution when combined with a highly sensitive CMOS 0.001 low lux image sensor.
You will appreciate the 100mm eye relief for a better shooting position.
With a onboard Ballistics Calculator you can accurately place your shot!
Key features
- 800*800 Circular LTPS display, first in the world.
- Sensor 2560*1440.
- Image shift zero.
- Ballistic Calculator.
- Patented focus-free lens cap.
- Long eye-relief display system (LEDS).
- 350m+ Adjustable IR light/Slightly less with the 940nm option.
- 1ooo meter laser rangefinder.
- Self-activated recording.
- Completely new UI.
- 4 image modes (colour, black and white, green and yellow).
- Multi-functional control knob.
- Wi-Fi.
- IP67 Waterproof rating.
- 6000J Recoil resistance.
Included:
- Standard scope rings to fit to your rifle’s Picatinny or Weaver rail.***
- 1 x 18650 Li-Ion Battery.
NOT Included:
- Compatible charger (18650 Li-Ion Battery)
- Micro SD Card from a reputable manufacturer for optional recording
If you still have an unanswered question or several, please don’t hesitate to contact us directly by message, email or phone and we will be more than happy to answer your questions…
***Please Note:
We have had a few inquires reference the Ring Mount Recoil Lug. Only one recoil lug is needed, therefore only one of the ring mounts will have the lug installed, see photo below.
Recommended Torque settings for PARD DS35 supplied Scope Rings.
Rings to rail: 25-30 in/lbs.
Rings around scope: 15 in/lbs.
Tighten the same way you would tighten lug nuts on a car – going around and incrementally tightening each screw in the ring in an “X” pattern until your torque wrench reaches the above values.
Do Not use Loctite Thread Locker on these screws. It will yield a “Wet Torque” that will cause the rings and bases to be over torqued even though you have set your torque wrench to the correct values.
VIDEOS
DS35 Overview
DS35 In the field
“EDGE of THE OUTBACK” YouTube video
Reviews
There are no reviews yet.